Home > Engineering > X-RAY 2 Spindles Automatic Measuring and Drilling Machine  This machine is capable of detecting more than two guide mark positions, and compensating the difference between the designed mark positions and actual mark positions in X and Y direction to drill the points which have minimum difference from the designed position. Multi-point Compensating System Data input is easily done even if some marks to be drilled at mark-center and some marks to be drilled at compensated positions are mixed at the same board. Auto-unloading Function The board can be unloaded to conveyor after drilling operations. Auto adjustment of spindle distance and table perpendicularity Stable accuracy is maintained throughout continuous running by auto adjustment function of spindle distance and table perpendicularity. Movable Clamper The clamper which has the same diameter with the drill moves with the drill. This prevent the happen of flash. Group input by compensating conditions Data input is easily done even if centered drilling positions and compensated drilling positions are mixed at the same board.  Main Specifications Drilling diameter φ6.0mm (max) Spindle stroke 8.0mm (max) Image processing area 10×10mm (max) Work size 290×310mm(min) 610×710mm(max) Spindle distance X-Axis 300 - 700mm Y-Axis 0 - 600mm Drilling Accuracy ±20μm(For compensated hole distance) ±20μm(When drilled at mark center) ±20μm(When drilled in distance) Production capacity (clamp to unclamp) 4 sec/2 hole board 10 sec/4 hole board 17 sec/4 hole board Spindle Air spindle (30,000rpm±10%) X-RAY Leakage 1 μSv/H (max) Power 3φ 200V 4KVA Air 0.6Mpa, 600Nl/min (Dry air) Dimension 1600(W)×2970(D)×1600(H)mm Weight 2500kg